Uutiset

  • Guide ,How to print PETG successfully

    PETG, short for polyethylene terephthalate glycol, is a tough, temperature-resistant, and highly impact-resistant plastic often used in FDM-style 3D printing. Here, we’ll take you through how to successfully print with PETG and help you troubleshoot common issues. While printing with PETG is cert...
    Lue lisää
  • Stronghero3D BIO-ABS Introduction

    Stronghero3D BIO-ABS, new formulation based on ABS, keep advantages of ABS and made some breakthrough. The Vicat softening temperature of BIO-ABS is about 110 ℃. The bending deformation temperature under load is about 100 ℃. The shrinkage of BIO-ABS is about 0.3-0.7%(Cl...
    Lue lisää
  • Guide to Print PLA Everything You Need to Know

    PLA (also called Polylactic acid) is a thermoplastic polyester. What makes it specials is that it’s usually based on renewable sources such as corn starch or sugarcane. PLA properties The renewable base allows PLA to be one of the fully degradable plastics used in 3D Printing. Although it will d...
    Lue lisää
  • Let’s talk something about PLA and PETG

      Because we are very familiar with PLA, let’s start with PLA. In extreme cases, for example, when the processing temperature is as high as 250 ℃, the PLA molecular chain will be broken and dispersed into countless small molecules, from more than a dozen or hundreds of thousands of ...
    Lue lisää
  • PETG vs PLA: erot - Yksinkertaisesti selitettynä |  All3DP

    PETG vs PLA: erot - Yksinkertaisesti selitettynä | All3DP

    PETG vs PLA: The Differences – Simply Explained | All3DP Because most of us probably started out FDM 3D printing with PLA filament, here are some points to consider when moving on to PETG: Bed adhesion is simpler with PLA. While you can do without a heated bed when 3D printing PLA, PETG requir...
    Lue lisää
  • 2019 PETG Hehkulamput Ostajan opas

    2019 PETG Hehkulamput Ostajan opas

    PETG Filament Buyer’s Guide Best Overall PETG Filament – Reviewed When any material boasts environmental friendliness as a primary feature, it’s difficult not to give that filament some brownie points. We were excited when we cracked open Innofil3D’s EPR InnoPET because of the ...
    Lue lisää
  • 5 Easy Vinkkejä 3D Tulostaminen PETG & Print Settings

    5 Easy Vinkkejä 3D Tulostaminen PETG & Print Settings

    Tips for 3D Printing with PETG & Print Settings An Overview Printed successfully, PETG performs incredibly! Source: All3DP PETG, short for polyethylene terephthalate glycol, is a tough, temperature-resistant, and highly impact-resistant plastic often used in FDM-style 3D printing....
    Lue lisää